Epson LQ-300 User Manual page 67

7. Take a stack of paper and fan it. Next, tap the side and
bottom of the paper on a flat surface to even up the stack.
Caution:
c
Do not use envelopes, multi-part forms, carbon paper, or
labels in the cut-sheet feeder.
8. Insert up to 50 sheets of paper along the left edge guide.
9. Adjust the position of the right edge guide so that it
matches your paper's width. Make sure the position of the
guide allows the paper to move up and down freely.
10. Push the paper-set levers back to clamp the paper against
the guide rollers.
11. To reinstall the paper guide, remove the wire paper
supports from the edge guides of the paper guide. Insert
the two stacker supports packed with the cut-sheet feeder
into the notches on the edge guides.
Wire paper support
Stacker support
Stacker support
Wire paper support
Using the Printer
2-31