Epson LQ-300 User Manual page 70

4. Release the sprocket lock levers of the pull tractor and adjust
the sprocket units to match the width of the paper. Be sure
that the sprocket units on both the tractors are aligned so
that the paper is not crooked.
5. Open the sprocket covers. Fit the holes of the paper over the
tractor pins of the sprocket units and adjust the sprocket
units as necessary. (See " Printing on Continuous Paper" on
page 2-7.) Close the sprocket covers.
6. If there is slack in the paper between the push and pull
tractors, turn the knob on the right side of the pull tractor to
remove the slack.
7. See that the paper is not crooked or wrinkled and lock the
sprocket units in place.
8. Reinstall the printer cover and the paper guide.
2-34
Using the Printer