Epson LQ-300 User Manual page 84

Paper may be jammed near the print head. Look for a
paper jam and remove it.
Make sure the edge guide positions on the paper guide are
correct. Position the edge guides at the diamond-shaped guide
marks.
There may be only one sheet left in the bin. Add more paper.
Two or more sheets feed at one time.
You may have loaded too many sheets in the cut-sheet
feeder's bin. Make sure the bin contains no more than 50 sheets.
You may have forgotten to fan the stack of paper before
loading it into the bin. Remove the paper and fan it.
The paper feed is crooked.
The paper may be old or creased. Use only new, clean sheets
of paper.
There may be too much paper in the stacker.
Make sure the paper guides are set correctly and your paper is
the proper size and quality. See the Appendix for paper
specifications.
One page of your document has printed on two pages.
Check that the page-length setting and lines-per-page setting in
your software are correct. See " Getting the results you expect"
on page 2-6.
3-10
Troubleshooting