Video setting
1
Click
Video setting in the table of contents.
2
Set the following settings for video quality.
•
[Frame Rate]:
Set the frame rate selecting "1", "2", "5", "7.5", "10" or "15"
fps from the pull-down menu.
•
[Quality]:
Set the video quality selecting "Low", "Middle", "High" or
"Excellent" from the pull-down menu.
3
Click
Temporarily stored
results temporarily.
If you wish to cancel the setting results you have made,
*
click a title in the table of contents or "Refresh" in the
web browser menu.
NOTE:
Raising [Frame Rate] from 1 to 15 fps gives you a smoother image
quality. Also, raising [Quality] gives you a fi ner image. However, if
both [Frame Rate] and [Quality] are raised at the same time, a large
amount of network bandwidth will be required.
to save the current setting
E-mail setting
You can send an e-mail when calling or send error messages
etc. by e-mail. Up to 3 mail addresses can be set.
NOTES:
•
Prepare an e-mail account for this function beforehand.
Make sure to enter the system name at
•
Individual] – [System name] to display the title with an e-mail.
Make sure to enter primary and/or secondary DNS server
•
information at [Network setting: Individual] to all the IP units.
The body of the message is only in English.
•
1
Click
E-mail setting in the table of contents.
2
Set the following settings.
•
[Email destination address]:
Enter up to 3 mail addresses (destination addresses).
•
[Email source address]:
Enter the source mail address.
•
[SMTP authentication]:
Confi gure SMTP authentication as required by source
E-mail provider.
•
[Mailing event]:
Select mailing events by setting the target ones to [ON].
3
Click
Temporarily stored
results temporarily.
*
If you wish to cancel the setting results you have made,
click a title in the table of contents or "Refresh" in the
web browser menu.
[Network setting:
to save the current setting
29