Torque Specifications - Cub Cadet Domestic Series 5000 Service Manual

Domestic Series 5000 MFD
10.

TORQUE SPECIFICATIONS

Item
Ring Gear Bolts
Perimiter Bolts (axle housing)
Kingpin Housing to Axle Housing
Axle Cover
Stop Bolts (top of axle housings)
Steering Arm to Kingpin Housing
Tie Rod End Nuts
Tie Rod End Jam Nuts
Steering Cylinder Stud to Housing
Steering Cylinder Stud Nut
Steering Cylinder Mounting Bracket
Axle Mounting Bracket
Fill Plug
Drain Plug
Pinion Drag (Not tightening troque)
Lug Nuts
Notes:
242 blue*: Loctite may be applied if
nylon locking feature is worn.
Replacement preferred.
re-torque*: Re-torque after 10 hrs. of operation.
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Torque SAE
160-220 in-lbs
160-220 in-lbs
220-280 in-lbs
160-220 in-lbs
220-280 in-lbs
220-280 in-lbs
49 ft-lbs
360-420 in-lbs
267 ft-lbs
150 ft-lbs
75 ft-lbs
75 ft-lbs
220-280 in-lbs
220-280 in-lbs
25-30 in-lbs
55 ft-lbs
60
Torque Metric Loctite
18-25 Nm 242 blue
18-25 Nm 242 blue
25-34 Nm 242 blue
18-25 Nm 242 blue
25-34 Nm 242 blue
25-34 Nm 242 blue
66 Nm 242 blue *
488-570 Nm 242 blue *
362 Nm 242 blue *
136 Nm 242 blue *
100 Nm 242 blue
100 Nm 242 blue
25-34 Nm no
25-34 Nm no
2.825-3.4 Nm stake
63 Nm re-torque*