Installation Ii Menu - InFocus IN134UST User Manual

Installation II Menu

Press the MENU button to open the OSD menu. Press the ◄► buttons to move to the Installation II
menu. Press the ▲▼ buttons to move up and down in the Installation II menu.
I
TEM
Auto Source
Auto Power Off
(min.)
Auto Power On
Fan Speed
Lamp Mode
Advanced
Factory Reset
Status
Press the ◄► buttons to enable or disable automatic source detection.
Press the ◄► buttons to enable or disable automatic shutdown of lamp when there is
no signal.
Press the ◄► buttons to enable or disable automatic power On when AC power is
supplied.
Press the ◄► buttons to toggle between Normal and High fan speeds.
Note: It is recommended that the Fan Speed be set to high speed when the altitude of
the environment is higher than 1500m (4021 ft).
Press the ◄► buttons to select the lamp mode for higher brightness or lower
brightness to save lamp life.
Press (Enter) / ► to enter the Advanced menu. See Advanced Feature on page
30.
Press (Enter) / ► to reset all items to factory preset values.
Press (Enter) / ► to enter the Status menu. See page 38 for more information on
Status.
IN134UST/IN136UST User's Manual
D
ESCRIPTION
– 29 –