InFocus IN134UST User Manual page 20

4.
Press the ▲▼ buttons to select
Security Lock.
Press the ◄► buttons to enable or
5.
disable security lock function.
A password dialog box automatically
appears.
6.
You can use the cursor buttons
▲▼◄►
on IR remote control for password
entry. You can use any combination
including the same arrow five times,
but five characters must be used.
Press the cursor buttons in any order
to set the password. Push the MENU
button to exit the dialog box.
7.
If the Security Lock is enabled, the
user will be prompted to enter a
password when the projector's power
button is pressed.
Enter the password in the order you
set it at step 5. In case you forget the
password, please contact the service
center.
Service center will validate the owner
and help reset the password.
IN134UST/IN136UST User's Manual
– 13 –