Configuring Dscp To Queue - HP V1905 Series Getting Started Manual

Table 85 CoS to Queue Setup Page item description
Item
Restore Defaults
Class of Service
Queue
Viewing CoS to Queue
The CoS to Queue Summary Page contains a table that displays the CoS values mapped to traffic queues.
Click Device  QoS  CoS to Queue. The CoS to Queue Summary Page opens.
Figure 106 CoS to Queue Summary Page
The CoS to Queue Summary Page contains the following fields:
Table 86 CoS to Queue Summary Page item description
Item
Class of Service
Queue

Configuring DSCP to Queue

Defining DSCP to Queue
The DSCP to CoS Setup Page contains fields for mapping DSCP settings to CoS priority tag values. For
example, In default, a packet with a DSCP tag value of 3 can be assigned to queue 1.
Click Device  QoS  DSCP to Queue  Setup. The DSCP to Queue Setup Page opens.
Description
Restores the switch factory defaults for mapping CoS values to forwarding queues.
Specifies the CoS priority tag values, where 0 is the lowest and 7 is the highest.
Defines the traffic forwarding queue to which the CoS priority is mapped.
Description
Displays the CoS priority tag values, where 0 is the lowest and 7 is the highest.
Indicates the traffic forwarding queue to which the CoS priority is mapped. Four
traffic priority queues are supported.
67