Error Messages; Command Edit - HP V1905 Series Getting Started Manual

Table 121 Access history commands
Operation
Access the previous
history command
Access the next history
command
NOTE:
 You may use arrow keys to access history commands in Windows 2000/XP/2003 Terminal or Telnet.
However, the up-arrow and down-arrow keys are invalid in Windows 9X HyperTerminal, because
they are defined in a different way. You can use <Ctrl+P> and <Ctrl+N> instead.
When you enter the same command several times, only one command is saved by the CLI as a history

command.

Error Messages

If the command you enter passes the syntax check, it will be successfully executed; otherwise an error
message will appear.
Table 122 Common error messages
Error message
Unrecognized command
Incomplete command
Too many parameters
Ambiguous command
Wrong parameter
Found at '^' position.

Command Edit

The CLI provides basic command edit functions and supports multi-line editing. The maximum number of
characters a command can contain is 254.
Table 123 Edit operations
Press...
A common key
The Backspace key
Operation
Press the up-arrow key or <Ctrl+P>
Pressing the down-arrow key or
<Ctrl+N>
Table 122 lists the common error messages.
Description
The command does not exist.
The keyword does not exist.
The parameter type is wrong.
The parameter value is out of range.
The command entered is incomplete.
You have entered too many parameters.
The parameters entered are ambiguous.
A parameter entered is incorrect.
An error is found at '^' position.
Table 123
To...
If the command does not reach 254 characters, insert the character at the
current cursor position and move the cursor one character to the right.
Delete the character on the left of the cursor and move the cursor one character
Description
This operation recalls the previous
history command (if available).
This operation recalls the next history
command (if available).
lists the CLI edit operations.
114