System Specifications - HP V1905 Series Getting Started Manual

LED
Duplex
Module Active
PoE Power (Only supported by HP
V1905-24-PoE Switch JD992A)

System Specifications

Table 39 contains the system specifications of the Switch.
Table 39 System specifications of the Switch.
Specification
Physical dimensions
(H×W×D)
Weight
Console port
Ethernet port
Gigabit Combo port
AC Input voltage
Power consumption (full
load)
Operating temperature
Storage temperature
Operating humidity
(noncondensing)
Storage humidity
(noncondensing)
Status
Yellow
10/100/1000
BASE-T port
OFF
Green
SFP port
OFF
Green
OFF
V1905-24
44 mm×440 mm×170
mm
1.6 kg
1
24
2
Rated voltage range:
100–240V AC, 50/60
Hz
17 W
0°C to 40°C (32°F to 104°F)
–40°C to +70°C (–40°F to 158°F)
5% to 95%
5% to 95%
Description
not faulty.

For fiber connections, ensure that the receive (RX) and
transmit (TX) cable connectors are not swapped.
If these checks do not identify the cause of the problem, it
may be that the unit or the device connected to the port is
faulty. Contact your supplier for further advice.
The port is in full duplex mode.
The port is not connected, or is in half duplex mode.
The SFP module is inserted.
The SFP module is not inserted or is not recognized.
The port is supplying power to the device connected to it.
The port is not supply power to the device connected to it
or not connected.
V1905-24-PoE
44 mm×440 mm×238
mm
3.2 kg
1
24 (Each port can
provide a power
supply of 25 W)
2
Rated voltage range:
100–240V AC, 50/60
Hz
205 W
4
V1905-48
44 mm×440 mm×238
mm
2.9 kg
1
48
2
Rated voltage range:
100–240V AC, 50/60
Hz
26 W