Cli Features; Online Help - HP V1905 Series Getting Started Manual

Figure 152 Connecting a Workstation to the switch using the Console Port
Open your terminal emulation software and configure the COM port settings to which you have
2.
connected the cable. The settings must be set to match the default settings for the switch, which are:
 38,400 baud (bits per second)
 8 data bits
no parity

1 stop bit

no hardware flow control

Turn on the switch. The user will be prompted to press the Enter key if the switch successfully completes
3.
POST (power-on self test). The prompt (such as < Command-Line >) appears after the user presses the
Enter key.

CLI Features

Online Help

CLI provides two types of online help: complete online help and partial online help. They assist you with
your configuration.
112