Configuring Trust Mode; Configuring Bandwidth Settings - HP V1905 Series Getting Started Manual

Table 88 DSCP to Queue Summary Page item description
Item
DSCP
CoS

Configuring Trust Mode

The Trust Setup Page contains information for configuring trust mode on the switch.
Click Device  QoS  Trust  Setup. The Trust Setup Page opens.
Figure 109 Trust Setup Page
The Trust Setup Page contains the following fields:
Table 89 Trust Setup Page item description
Item
Trust Mode

Configuring Bandwidth Settings

Defining Bandwidth Settings
The Bandwidth Setup Page allows network managers to define the bandwidth settings for a specified
interface.
Click Device  QoS  Bandwidth  Setup. The Bandwidth Setup Page opens.
Description
Displays the incoming packet's DSCP value.
Indicates the CoS value forwarding queue to which the DSCP priority is mapped. The
possible field values are 0-7.
Description
Specifies which packet fields to use for classifying packets entering the switch. When
no rules are defined, the traffic containing the predefined packet CoS field is
mapped according to the relevant trust modes table. Traffic not containing a
predefined packet field is mapped to "best effort". The possible Trust Mode field
values are:

CoS: Classifies traffic based on the CoS tag value.

DSCP: Classifies traffic based on the DSCP tag value.
69