Management-Vlan Port - HP V1905 Series Getting Started Manual

View
User view
Parameter
vlan-id: VLAN ID, in the range of 1 to 4094.
Description
Use the management-vlan command to configure a VLAN as the management VLAN of the switch. Use the
undo management vlan command to restore the default management VLAN.
By default, VLAN 1 operates as the management VLAN of the switch.
Example
# Configure VLAN 10 as the management VLAN of the switch, and view the configuration result.
<Command-Line> management-vlan 10
<Command-Line> display management-vlan
VLAN ID: 2
IP Address: 192.168.0.241
Subnet Mask: 255.255.255.0
Tagged Ports: none
Untagged Ports: none

management-vlan port

Syntax
management-vlan port ethernet interface-number [ to ethernet interface-number ]
View
User view
Parameter
interface-number: Ethernet port number
Description
Use the management-vlan port command to add Ethernet ports of the switch to the management VLAN.
By default, all Ethernet ports of a switch belong to management VLAN 1.
Example
# Configure VLAN 10 as the management VLAN, and add Ethernet 0/1 through Ethernet 0/5 of the switch
to the management VLAN.
<Command-Line> management-vlan 10
<Command-Line> management-vlan port ethernet0/1 to ethernet0/10
<Command-Line> display management-vlan
VLAN ID: 10
IP Address: 192.168.0.241
Subnet Mask: 255.255.255.0
Tagged Ports: none
Untagged Ports:
Ethernet0/1
Ethernet0/4
Ethernet0/2 Ethernet0/3
Ethernet0/5 Ethernet0/6
119