Configuring The Switch; Configuring System Access; Defining System Access - HP V1905 Series Getting Started Manual

Configuring the Switch

Configuring System Access

Network administrators can define user name, password, and access level for users using the System
Access Interface. The Multi-Session Web feature is enabled on switch and allows 10 users to be created
and access the switch concurrently. Access levels provide read or read/write permissions to users for
configuring the switch. Login information is managed in the local database. A unique password is required
for each user. Two access levels exist on the Web Interface:
Management access level: Provides the user with read/write access rights. There is always one

management level user configured for the switch.
 Monitor access level: Provides the user with read-only system access rights.
This section contains the following topics:

Defining System Access


Modifying System Access

Removing System Access

Viewing System Access Settings

CAUTION:
To ensure that unauthorized users do not access the Web interface, HP recommends that you set an admin
password when you first configure the switch.
Defining System Access
The System Access Setup Page allows network administrators to define users, passwords, and access levels
for users using the System Access Interface.
Click Administration  System Access  Setup. The System Access Setup Page opens.
Figure 54 System Access Setup Page
18