Making A Subdued Off-Hook Voice Announcement (Sohva) - Comdial DSU Series User Manual

Making Calls
•
To dial personal or system speed dial number,
NOTE: If you manually choose a line for dialing, press HOLD before
using a speed dial. If you place a call on hold prior to using
your speed dial, pause several seconds before you press the
speed dial button; if you immediately press the speed dial
button, the system will choose the line that you have on hold to
place your speed dial call.
1. Dial desired code:
1-0 = personal speed dial number,
10 - 99 = system speed dial number,
if you select a line, press HOLD then dial code.
2. When called party answers, lift handset.
3.3 Making A Subdued Off-Hook
Voice Announcement (SOHVA)
Make a SOHVA announcement using the SOHVA button
as follows:
1. Make intercom call and hear busy tone.
2. If you decide not to interrupt the called party, hang up.
If you wish to interrupt the called party after hearing a busy
tone, press the SOHVA button and hear several quick tone bursts,
1. Make announcement (busy tone means that the called telephone is
in speakerphone mode and you cannot make announcement, that
your SOHVA has been denied through system programming, or
that the called party has voice announce block enabled).
2. Wait on line for reply (called telephone may send non-verbal reply
to your display and then disconnect from your telephone).
NOTE: The caller cannot control how the announcement is received.
This depends upon the equipment used and class-of-service
programming.
3 – 2 LCD Speakerphone Station User's Guide
GCA70–281