Understanding What The Rings Mean - Comdial DSU Series User Manual

GCA70–281
–
Next to the HOLD button:
Flashing red = message awaits pick up (models 8012S, 8024S).
Fluttering red = automatic station relocation has been set.
–
Next to the MESSAGE button (models 8312S, 8324S, and 8324F):
Flashing red = message awaits pick up
–
Next to the SPEAKER button:
On steady (with telephone on hook and busy) = speakerphone
mode is active.
On steady (with telephone on hook and idle) = background
music is turned on.
On steady (with telephone off hook and busy) = group listen is
active.
–
Next to the MUTE button:
On steady = called party cannot hear your conversation.
–
Next to the SHIFT button:
On steady = shift mode is activated to allow access to second
level autodial numbers programmed at DSS button locations.
1.5

Understanding What the Rings Mean

•
Two short rings = intercom call.
•
Single longer ring = outside call.
•
One short ring burst = voice announce.
•
Three short ring bursts = ring back from a held call, callback from a
queued call.
You can vary the ringing tone of your telephone, choosing from one of
six different rings. This way, you can identify your ring even though you
may not be close to your telephone.
Additionally, so you won't be disturbed when you're busy on a call and
another call rings at your station, the ring volume is subdued
automatically.
LCD Speakerphone Station User's Guide 1 – 13
Introducing The Telephone