Table of Contents
Advertisement
DIGITAL LONG
CABLE*
2
(DVI/HDMI input only)
DIGITAL LONG
2
CABLE*
(DP/Mini-DP
input only)
LONG CABLE
CAPABILITY*
(Analog input only)
Tag4
AUTO ADJUST*
(Analog input only)
SIGNAL ADJUST*
(Analog input only)
AUTO ADJUST
LEVEL*
(Analog input only)
A-NTAA SW*
(Analog input only)
AUTO CONTRAST*
(Analog input only)
CONTRAST*
(Analog input only)
* Only for MD242C2.
1
*
This item will not be reset during a FACTORY PRESET.
2
*
Only for MD302C4.
Compensates for image degradation caused by using a long cable.
A lower number produces less compensation.
Compensates for disturbed image caused by using a long DisplayPort cable.
There are 2 possible settings, 1 and 2. Setting "2" produces a better result, but may
reduce display colors. The default setting is "1".
R-H.POSITION: Adjusts the position of the red component of the image.
Press "LEFT" or "RIGHT" to adjust.
G-H.POSITION: Adjusts the position of the green component of the image.
Press "LEFT" or "RIGHT" to adjust.
B-H.POSITION: Adjusts the position of the blue component of the image.
Press "LEFT" or "RIGHT" to adjust.
R-FINE: Adjusts the "FINE" setting of the RED component of the image.
Press "LEFT" or "RIGHT" to adjust.
G-FINE: Adjusts the "FINE" setting of the GREEN component of the image.
Press "LEFT" or "RIGHT" to adjust.
B-FINE: Adjusts the "FINE" setting of the BLUE component of the image.
Press "LEFT" or "RIGHT" to adjust.
R-SHARPNESS: Adjusts the sharpness of the red component of the image.
Press "LEFT" or "RIGHT" to adjust.
G-SHARPNESS: Adjusts the sharpness of the green component of the image.
Press "LEFT" or "RIGHT" to adjust.
B-SHARPNESS: Adjusts the sharpness of the blue component of the image.
Press "LEFT" or "RIGHT" to adjust.
,
1
*
Automatically adjusts the Image Position and H.SIZE settings and FINE settings.
Press "SELECT" to activate Auto Adjustment. Please use test pattern, which is included
in the enclosed CD-ROM.
Determines when the auto adjustment is activated automatically.
The choices are "SIMPLE" and "FULL". Press "LEFT" or "RIGHT" to select.
H-size, Fine, H/V Position
SIMPLE
FULL
O: Automatic Adjustment
NOTE: Automatic Adjustment does not work at resolutions less than 800x600 resolution.
Determines the automatic adjustment level for AUTO ADJUST. The choices are "SIMPLE",
"FULL" and "DETAIL". Press "LEFT" or "RIGHT" to select. Refer to the below table.
Size, Fine, Position
SIMPLE
O
FULL
O
DETAIL*
O
O: Automatic Adjustment
* "DETAIL" activates automatic long cable (skew, peaking) adjustment.
The Advanced No Touch Auto Adjust function is able to recognize new signals even when
neither the resolution nor the refresh rate has changed. If several PCs are connected
to the monitor, and each transmit very similar (or even the same) signals in terms of
resolution and refresh rates, the monitor recognizes that there is a new signal and
automatically optimizes the picture without the need for any action on the part of the user.
OFF: A-NTAA is disabled.
ON: If a change in signal is detected A-NTAA will adjust the monitor to the optimal
settings for the new signal. If no change in the signal is detected then A-NTAA does not
activate. The screen will be blank while the monitor optimizes the signal.
OPTION: Functions the same as ON, except that the screen does not go blank when the
monitor makes adjustments for changes in signal, allowing the monitor to display the new
signal faster. When using an external switching device to connect 2 or more PCs to the
monitor, using the ON or OPTION settings is suitable.
,
*
1
Adjusts the image displayed for non-standard video inputs. Press "SELECT" to adjust.
Any adjustment requires the image to have white portions.
Adjusts the image brightness and contrast in relation to the background.
Press "LEFT" or "RIGHT" to adjust.
Contrast
O
X
O
O
X: No Automatic Adjustment
Contrast
Black Level
X
X
O
X
O
O
X: No Automatic Adjustment
English-21
Time
1 second
1.5 seconds
5 seconds
Advertisement
Table of Contents
