Table of Contents
Advertisement
USB SELECTION
Change USB upstream input associated with the current display input, 1 or 2. When connecting a computer to each
of the upstream ports, the monitor's USB downstream ports can be used by selecting this setting for the current input
signal.
You can change the active display and upstream USB port combination by using the Input button (see page 12).
You can set the USB selection for each input signals in Advanced menu (see page 23).
When using only one upstream port, the connected upstream port is used by default.
NOTE: To avoid data loss, before changing USB upstream ports, ensure that no USB storage devices are in use by
the operating system of the computer attached to the USB upstream port.
VIDEO DETECT
Selects the video detection method, when more than one video signal source is connected.
FIRST: When current video input signal is not present, then the monitor searches for a video signal from a different
video source. If a video signal is supplied by the other video source, the monitor automatically switches to the new
video source. The monitor will not look for any other video signals, as long as the current video signal is present.
LAST: When the monitor is displaying a signal from the current video source and a new secondary video source is
supplied to the monitor, then the monitor will automatically switch to the new video source. When current video input
signal is not present, then the monitor searches for a video signal from a different video source. If a video signal is
supplied by the other video source, the monitor automatically switches to the new video source.
NONE: The monitor will not search for any other video sources, unless the monitor is turned OFF and ON again with
the Power button.
OFF MODE
The Intelligent Power Manager (IPM) in the computer's operating system allows the monitor to switch to power save
mode after a period of user inactivity.
The OFF MODE has 4 settings.
OFF: The monitor does not switch to power save mode when the input signal is lost.
STANDARD: The monitor switches to power save mode when the input signal is lost. The monitor will return to normal
mode when the signal is restarted. The signal detection works frequently. STANDARD is the lowest power consumption
setting.
ADVANCED: The signal detection circuit works always. Recovery time to normal mode is faster than STANDARD.
Power consumption is higher than STANDARD.
NOTE: When set to STANDARD, if the image does not reappear when the signal is restarted, please change the
setting to ADVANCED.
OPTION: Monitor enters power save mode automatically when the amount of ambient light goes below the level that is
determined by the user. The level can be adjusted in POWER MANAGEMENT in Tag6 of the Advanced OSD menu.
When in power save mode, the LED on the front of the monitor blinks amber. While in power save mode, restart the
signal to return to normal.
When the amount of surrounding light returns to normal levels, the monitor will automatically return to normal mode.
QA TEST
Provides a quick daily visual image quality check of this diagnostic monitor by just using a button on the monitor.
MENU Tools
LANGUAGE
The OSD control menus are available in nine languages.
OSD LEFT/RIGHT
You can choose where you would like the OSD control menu to appear on your screen. Selecting OSD Location allows
you to manually adjust the position of the OSD control menu left or right.
OSD DOWN/UP
You can choose where you would like the OSD control menu to appear on your screen. Selecting OSD Location allows
you to manually adjust the position of the OSD control menu Up or Down.
OSD TURN OFF
The OSD control menu will stay on as long as it is use. You can select how long the monitor waits after the last touch
of a button to close the OSD control menu. The preset choices are 10-120 seconds in 5-second increments.
English-15
Advertisement
Table of Contents
