NEC MD242C2 Installation & Maintenance Manual page 22

RED
GREEN
BLUE
UNIFORMITY*
AMB. LIGHT COMP.
Tag2 SHARPNESS
RESPONSE
IMPROVE
COLOR
STABILIZATION*
(6 - AXIS ADJUST)
PICTURE MODE SW
Tag3 DVI Long Cable*
(DVI input only)
HDMI LONG CABLE*
(HDMI input only)
* Only for MD242C2.
* 1 This item will not be reset during a FACTORY PRESET.
Adjusts color gamut. When the selected settings are outside of the LCD gamut, the
indicator on the OSD will turn magenta.
1
This function electronically compensates the slight variations in the white uniformity
level that may occur across the display area of the screen. These variations are a
characteristic of LCD panel technology. This function evens out the luminance uniformity
of the display. Selectable UNIFORMITY levels are OFF, LOW and HIGH.
NOTE: Using the UNIFORMITY feature does reduce the overall peak luminance of the
display. If greater luminance is desired over the uniform performance of the display, then
UNIFORMITY should be turned off. A higher level produces a better uniformity result, but
may also reduce CONTRAST RATIO.
Adjusts the luminance and gamma value to be in user setting value including outside
luminance level.
OFF: No ambient light compensation.
1: Compensation based on the infl uence of external light measured during the
calibration.
2: Compensation based on the infl uence of surrounding light with constant
measurement of external light.
This is a digital capability for keeping a crisp image at all signal timings. It continuously
adjusts to maintain as distinct or as soft image as you prefer, and is set independently
according to different timings. Press "LEFT" or "RIGHT" to adjust.
Turns the Response Improve function on or off. Response Improve may reduce blurring
that occurs in some moving images. When the display is used in portrait mode in MAIN
IMAGE ROTATION or SUB IMAGE ROTATION, this function will be disabled.
Stabilizes the color of the image. Compensates for a yellow color shift that occurs with
, * 1 long-term LCD usage.
OFF: No function.
ON: Stabilizes Color.
NOTE: When the function is ON, the lifetime of the LUMINANCE setting level will be
reduced.
HUE: Adjusts the hue of each color*
menu color bars will show the amount of adjustment.
SATURATION: Adjusts the color depth of each color*
color vividness increases.
OFFSET: Adjusts the color brightness of each color*
color Brightness increases.
*2: RED, YELLOW, GREEN, CYAN, BLUE and MAGENTA.
PICTURE MODE is set ON/OFF. Setting "PICTURE MODE 2" OFF disables change to
"PICTURE MODE 2".
Compensates for image degradation caused by using a long DVI cable.
There are 4 possible settings, with "0" being the lowest level of compensation and "3"
being the highest level. The default setting is "1".
Compensates for image degradation caused by using a long HDMI cable.
There are 4 possible settings, with "0" being the lowest level of compensation and "3"
being the highest level. The default setting is "1".
2
. The change in color will appear on screen and the
English-20
2 . Press the "RIGHT" button and the
2
. Press "RIGHT" button and the