NETGEAR ProSafe Premium WNDAP620 Reference Manual page 88

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
Table 22. Unknown AP List fields (continued)
Setting
# of Beacons
Last Beacon
3. Click Save to export the list of unknown or known APs to a file. A window opens so you can
browse to the location where you want to save the file. The default file name is macList.txt.
If you wish, you can now import the saved list into the Known AP List on the Rogue AP
screen (see Enable and Configure Rogue AP Detection

To view the Known AP Lists and save it to a file:
1. Select Monitoring > Rogue AP > Known AP List. The Known AP List screen displays:
Figure 53.
2. Click Refresh to let the wireless access point discover the access points and populate the
Known AP List for the configured wireless mode.
The following table explains the fields of the Known AP List screen:
Table 23. Known AP List fields
Setting
MAC Address
SSID
Channel
3. Click Save to export the list of known access points to a file. A window opens so you can
browse to the location where you want to save the file. The default file name is macList.txt.
You can now import the saved list into the Known AP List on the Rogue AP screen (see
Enable and Configure Rogue AP Detection
Description
The number of beacons transmitted by the unknown AP that the wireless
access point has detected.
The time stamp that indicates the time when the most recent beacon was
detected.
Description
The MAC address of the known AP.
The SSID that the known AP is using.
The channel that the known AP is using.
on page 85).
Management and Monitoring
88
on page 85).