NETGEAR ProSafe Premium WNDAP620 Reference Manual page 109

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
Table 31. Advanced wireless settings (continued)
Setting
Beacon Interval (100–1000)
Aggregation Length (1024–65535)
Note: This setting does not apply
to the 802.11a mode.
AMPDU
Note: This setting does not apply
to the 802.11b/bg modes and the
802.11a mode.
RIFS Transmission
Note: This setting does not apply
to the 802.11b/bg modes and the
802.11a mode.
DTIM Interval (1–255)
Preamble Type
Note: This setting does not apply
to the 802.11a/na modes.
Antenna
Note: This setting does not apply
to the 802.11a/na modes.
802.11d
Note: This setting does not apply
to the 802.11a/na modes.
Client Isolation
Max. Wireless Clients
Description
Enter the interval between 100 ms and 1000 ms for each beacon
transmission, which allows the wireless access point to synchronize
the wireless network. The default setting is 100.
Enter the maximum length of aggregated MAC protocol data unit
(A-MPDU) packets. Larger aggregation lengths could lead to better
network performance. Aggregation is a mechanism used to achieve
higher throughput. The default setting is 65535.
Select the Enable radio button to allow the aggregation of several MAC
frames into a single large frame to achieve higher throughput. Enabling
the aggregated MAC protocol data unit (A-MPDU) could lead to better
network performance. By default, the Enable radio button is selected.
Select the Enable radio button to allow transmission of successive
frames at different transmit powers. Enabling reduced interframe space
(RIFS) could lead to better network performance. By default, the
Disable radio button is selected.
Enter the delivery traffic indication message (DTIM) interval, also
referred to as the data beacon rate, which indicates the beacon
delivery traffic indication message period in multiples of beacon
intervals. This value needs to be between 1 and 255. The default
setting is 3.
Select one of the following radio buttons to specify the preamble type:
• Long. A long transmit preamble might provide a more reliable
connection or a slightly longer range. A short transmit preamble
gives better performance.
• Auto. The Auto setting enables the wireless access point to handle
both long and short preambles. The default setting is Auto.
Select one of the following radio buttons to specify the antenna:
• Internal. Enables the internal antenna. This is the default setting.
• External. Enables an optional external antenna or antennas.
Select this check box to enable support for additional regulatory
domains that are not in the current standard; support includes the
addition of a country information element to beacons, probe requests,
and probe responses. This check box is selected by default.
From the drop-down list, select one of the following options:
• Enable. Communication between wireless clients that are
associated to different virtual access points (VAPs) is blocked.
Disable. Communication between wireless clients that are
•
associated to different VAPs is allowed. This is the default setting.
Enter the maximum number of wireless clients that can simultaneously
connect to the wireless access point at one time. The default setting is
128 clients.
Advanced Configuration
109