NETGEAR ProSafe Premium WNDAP620 Reference Manual page 152

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
| | | | | | | |-encryption
| | | | | | | |-name
| | | | | | | |-presharedkey
| | | | | | | |-remote-mac
| | | | | | | |-status
| | | | | | | |-wep-pass-phrase
| | | | | | | |-wepkey
| | | | | | | |-wepkeytype
| | | | | | |
| | | | | |
| | | | |
| | | | |-wmm>
| | | | | |-ap-data0-best-effort
| | | | | |-ap-data1-background
| | | | | |-ap-data2-video
| | | | | |-ap-data3-voice
| | | | | |-powersave
| | | | | |-station-data0-best-effort
| | | | | |-station-data1-background
| | | | | |-station-data2-video
| | | | | |-station-data3-voice
| | | | | |-support
| | | | |
| | | |
| | | |-5GHz>
| | | | |-aggregation-length
| | | | |-ampdu
| | | | |-beacon-interval
| | | | |-channel
| | | | |-channelwidth
| | | | |-dtim-interval
| | | | |-fragmentation-length
| | | | |-guardinterval
| | | | |-knownap-add
| | | | |-knownap-del
| | | | |-macacl-add
| | | | |-macacl-database
| | | | |-macacl-del
| | | | |-mcsrate
| | | | |-mode
| | | | |-operation-mode
| | | | |-power
| | | | |-preamble
| | | | |-radio
| | | | |-rate
| | | | |-rifs-transmission
| | | | |
| | | | |-rogue-ap-detection
| | | | |-rts-threshold
| | | | |-11dSupport
| | | | |-client-isolation
| | | | |-create-qos-policy
| | | | |-create-qos-classification
| | | | |-delete-qos-policy
| | | | |-delete-qos-classification
| | | | |
--Data encryption
--Profile name
--Preshared key
--Remote MAC
--Profile status
--Wireless wep passphrase key
--Wireless wep key
--Wireless wep key type
--WMM settings
--Access point best effort voice data
--Access point low-priority data
--Access point video data
--Access point voice data
--Station best effort voice data
--Station low-priority data
--Station video data
--Station voice data
--Support
--5.0 GHz wireless LAN interface setting
--Aggregated packet size
--Aggregated MAC Protocol Data Unit
--Wireless beacon period in TU(1024 us)
--Wireless channel (depends on country and wireless mode)
--Wireless channel width
--Wireless DTIM period in beacon interval
--Wireless fragmentation threshold(even only)
--Interval (from interference from other transmissions)
--Add known access point
--Delete known access point
--Add wireless access control (ACL)
--Delete wireless access control (ACL) database
--Delete wireless access control (ACL)
--Transmit data rate
--Enable wireless access control (ACL)
--Wireless operation mode
--Wireless transmit power
--Wireless preamble (only effect on 802.11b rates)
--Enable wireless radio
--Wireless transmission date rate
--Enable successive frame transmission at different
transmit powers
--Enable rogue access point detection
--Wireless RTS/CTS threshold
--IEEE802.11d status
--Client isolation status
--Create QoS (Quality of service) policy
--Create Qos (Quality of service) classification
--Delete QoS (Quality of service) policy
--Delete Qos (Quality of service) classification
Command-Line Reference
152