NETGEAR ProSafe Premium WNDAP620 Reference Manual page 144

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
Table 40. Default configuration settings (continued)
Feature
Wireless mode
Wireless network name (SSID)
Broadcast network name SSID
802.11ng radio frequency channel
MCS index/data rate (transmission speed)
Channel width
Guard interval
Output power
Wireless on/off (radio scheduling)
RTS threshold
Fragmentation length
Beacon interval
Aggregation length
AMPDU
RIFS transmission
DTIM interval
Preamble type
Antenna
802.11d
Client isolation
Maximum wireless clients
Wi-Fi Multimedia (WMM)
WMM powersave
AP EDCA parameters (QoS settings)
Station EDCA parameters (QoS settings)
Description
11ng
NETGEAR_11ng
Enabled
Auto
Best
Note:
from IEEE Standard 802.11 specifications.
Actual throughput will vary. Network conditions
and environmental factors, including volume of
network traffic, building materials and
construction, and network overhead, lower
actual data throughput rate.
20 MHz
Auto
Full
Disabled
2347
2346
100
65535
Enabled
Disabled
3
Auto
Internal
Enabled
Disabled
128
Enabled
Enabled
See
Supplemental Information
144
Maximum wireless signal rate derived
Table 32 on page 111.