NETGEAR ProSafe Premium WNDAP620 Reference Manual page 54

Prosafe premium 3 x 3 dual-band wireless-n access point
Hide thumbs Also See for ProSafe Premium WNDAP620:
Table of Contents

Advertisement

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
Figure 22.
Table 11. WEP encryption settings
Setting
Descriptions
Data Encryption
Select the encryption key size from the drop-down list:
64-bit WEP. Standard WEP encryption, using 40/64-bit encryption.
128-bit WEP. Standard WEP encryption, using 104/128-bit encryption.
152-bit WEP. Proprietary WEP encryption mode, using 128+24 bit encryption. This
mode functions only with other wireless stations that support this mode.
Passphrase
Enter a passphrase. The passphrase length needs to be between 8 and 63 characters
(inclusive). The secret passphrase allows you to generate the keys automatically by
clicking Generate Keys. The default passphrase is sharedsecret.
You can display the actual passphrase by selecting the Show Passphrase in Clear Text
Yes radio button.
Encryption Key
Either enter a key manually or allow the key to be automatically generated by clicking
(Key1–Key4)
Generate Keys.
For ASCII format, depending on the key size selected, the manually entered
encryption key needs to have a length of 5 (64-bit WEP), 13 (128-bit WEP), or
16 characters (152-bit WEP).
For HEX format, depending on the key size selected, the manually entered or
automatically generated encryption key needs to have a length of 10 (64-bit WEP),
26 (128-bit WEP), or 32 (152-bit WEP) characters.
Note:
Show Passphrase in
Select the Yes radio button to display the actual passphrase in the Passphrase field. The
Clear Text
default setting is No.
Configure Legacy 802.1X
To use legacy 802.1X security, you need to define RADIUS server settings. For information
about RADIUS servers, see
When you select Legacy 802.1X from the Network Authentication drop-down list, the Data
Encryption drop-down list is automatically set to None. To use legacy 802.1X security, you
need to define the RADIUS servers only.
Wireless stations need to use the key to access the wireless access point.
Configure RADIUS Server Settings
Wireless Configuration and Security
54
on page 57.

Advertisement

Table of Contents
loading

Table of Contents