Char-Broil 463269311 Product Manual page 26

19
Install heat diffuser by sliding one end of each heat diffuser into slots at front of firebox and resting opposite end on pins in
back of firebox.
Note: Some parts omitted for
clarity of illustration
20
Place stainless steel emitters into the firebox, shown A. Place cooking grates onto stainless steel emitters, shown B.
Insert the two wire ends at rear of warming rack into holes in back of firebox. Front wires of warming rack rest on sides of
firebox, shown C.
Note: Some parts omitted for
clarity of illustration
A
Stainless steel
emitter
26
IMPORTANT: Stainless steel
emitters must be placed
keeping both flat walls
overlapped to prevent any
flare-up.
Assembled
warming rack
Heat diffuser
B
C
Warming rack
Front of firebox
Back of firebox
Cooking grate