Light Operation Instructions - Char-Broil 463269311 Product Manual

Grill Halogen Light

LIGHT OPERATION INSTRUCTIONS

1. Make sure light switch on the control panel is in the "OFF" position.
2. Connect light plug to an extension cord, then put the extension
cord plug into the outlet on the wall.
3. Turn the light switch to "ON".
WARNING
Keep any electrical supply cord away from any
˙
heated surface.
Use the shortest length extension cord required.
˙
Do not connect 2 or more extension cords together.
Bulb Replacement
▲
Make sure light switch on the control panel is in the "OFF" position and adapter plug is disconnected from outlet.
Step 1
Release the screw securing the light
socket.
Step 4
Reverse instructions from step 2
through step 1 to re-install socket.
Step 2
Take out the socket and remove the lens.
CAUTION
Take care not to touch the bulb with your bare fingers.
Touching bulb with your skin can leave a film on the
bulb that causes it to burn out quickly.
2.
1.
ON
OFF
Light plug
Pull out the bulb and replace
with a new bulb.
Bulb Specification
Bulb Type: Halogen
Wattage: 10 W per bulb
Voltage: 12 V
3.
ON
OFF
Extension cord,
for out door use
Step 3
Continued on next page
11