Assembly - Char-Broil 463269311 Product Manual

ASSEMBLY

1
Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place, shown A.
Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U Pin and repeat for remaining
casters. Make sure the two locking casters are secured at the rear and the non-locking casters are secured at the front.
After all 4 casters are secure remove the Bent U Pin and save for future maintenance.
Locking caster
Bottom shelf
2
Attach side panels to bottom shelf using three
1/4-20x1/2" screws, 7mm lock washers per panel.
IMPORTANT: Panel with hole must
be on left side of bottom shelf.
Left side panel
(with hole)
Make sure side panels
are pushed as far to the
rear of bottom shelf as
possible before fully
tightening screws.
16
Fixed caster
1/4-20x1/2" screw
7mm lock washer
A
Bent U pin
Right side panel