Char-Broil 463269311 Product Manual page 18

5
This step requires two people
to lift and position grill head
onto cart.
Carefully lower the grill
head onto the cart, aligning slots at
bottom of grill head with posts on
cart side panels. Make sure the
regulator hose is hanging outside
the cart. Grill head must face open
side of cart.
6
Insert front brace under control panel and between cart side panels.
Secure using two 1/4-20x1½"
NOTE: MAKE SURE THAT THE FRONT BRACE IS MOUNTED AS ILLUSTRATED BELOW.
18
screws, 7mm lock washers on each side.
Grill head
Regulator hose
7mm Lock
1/4-20x1½"
Washer
Screw