Char-Broil 463269311 Product Manual page 22

11
Insert sideburner burner into left shelf.
shelf, shown A.
Secure burner to sideburner drip pan with one Wing nut, shown B. Under sideburner shelf, attach
sideburner ignitor wire to electrode. Make sure burner tube engages sideburner valve, shown B.
Sideburner burner
Sideburner drip pan
12
Place sideburner lid onto left shelf and align holes in back of lid with hinge holes. Secure lid to hinges using four #8-32x3/8"
screws, 4mm flat washers, 4mm lock washers, and #8 nuts.
22
The stud on bottom of burner fits into rear small hole in sideburner drip pan on
A
#8-32x3/8" screw
B
Wing nut
Electrode
Sideburner lid
4mm flat washer
4mm lock washer
#8 nut
Ignitor wire
NOTE: Fully secure one hinge
with screws, washers and nuts,
then secure remaining hinge.