No_Remote_Gateway (Id: 01800503); No_Route (Id: 01800504); Ping_Keepalive_Failed_In_Tunnel (Id: 01800505); Ipsec_Interface_Disabled (Id: 01800506) - D-Link NetDefend DFL-210 Log Reference Manual

2.22.62. no_remote_gateway (ID:
01800503)
Recommended Action
Revision
Parameters

2.22.62. no_remote_gateway (ID: 01800503)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision

2.22.63. no_route (ID: 01800504)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision

2.22.64. ping_keepalive_failed_in_tunnel (ID: 01800505)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision

2.22.65. ipsec_interface_disabled (ID: 01800506)

This is usualy a consequence of low memory or a bad configuration.
Look for previous log messages to find the cause for the interface
being disabled.
1
ipsec_connection
ERROR
Remote gateway is null. No route is possible
No remote gateway for packet, i.e no route defined.
packet_will_be_dropped
None.
1
ERROR
Failed to lookup route. No route for packet.
No remote gateway for packet, i.e no route defined.
packet_will_be_dropped
None.
1
ERROR
IPsec ping monitor detects loss if ping replies of packets INSIDE the
tunnel
IPsec ping monitor detects loss if ping replies of packets INSIDE the
tunnel.
tunnel_will_disabled_after_8_number_of_lost_packets
None.
1
266
Chapter 2. Log Message Reference