Failed_To_Create_Xauth_Group (Id: 01800329); Ipsec_Tunnel_Added (Id: 01800333); Ipsec_Tunnel_Added_Bysgw (Id: 01800334) - D-Link NetDefend DFL-210 Log Reference Manual

2.22.49. Failed_to_create_xauth_group
(ID: 01800329)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.22.49. Failed_to_create_xauth_group (ID: 01800329)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision

2.22.50. IPSec_tunnel_added (ID: 01800333)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.22.51. IPSec_tunnel_added_bySGW (ID: 01800334)

Default Severity
Log Message
Explanation
Gateway Action
ERROR
Failed set XAuth for tunnel <tunnel>
Failed to set extended authentication (XAuth) for the tunnel.
None
Reconfigure_tunnnel.
1
tunnel
CRITICAL
Failed create XAuth group
Failed to create extended authentication (XAuth) group.
None
None.
1
INFORMATIONAL
IPsec tunnel added to the configuration
An IPsec tunnel has been enabled or added to the configuration.
reconfiguration
None.
1
username
client_ip
IPsec_tunnel
INFORMATIONAL
IPsec tunnel added by the Security Gateway
An IPsec tunnel has been added by the Security Gateway.
reconfiguration_by_SGW
262
Chapter 2. Log Message Reference