Recieved_Plaintext_Packet_For_Disabled_Ipsec_Interface (Id: 01800502); No_Remote_Gateway (Id: 01800503); No_Route (Id: 01800504); Ping_Keepalive_Failed_In_Tunnel (Id: 01800505) - D-Link DFL-260E Log Reference Manual

Network security firewalls netdefendos
Hide thumbs Also See for DFL-260E:
Table of Contents

Advertisement

2.22.61. Recieved_plaintext_packet_for_disabled_IPsec_interface
(ID: 01800502)
2.22.61. Recieved_plaintext_packet_for_disabled_IPsec_interface
(ID: 01800502)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.22.62. no_remote_gateway (ID: 01800503)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision

2.22.63. no_route (ID: 01800504)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision

2.22.64. ping_keepalive_failed_in_tunnel (ID: 01800505)

Default Severity
Log Message
WARNING
IPsec tunnel <ipsec_connection> is disabled. Packet will be dropped
A packed was dropped due to the IPsec interface being disabled.
packet_will_be_dropped
This is usualy a consequence of low memory or a bad configuration.
Look for previous log messages to find the cause for the interface
being disabled.
1
ipsec_connection
ERROR
Remote gateway is null. No route is possible
No remote gateway for packet, i.e no route defined.
packet_will_be_dropped
None.
1
ERROR
Failed to lookup route. No route for packet.
No remote gateway for packet, i.e no route defined.
packet_will_be_dropped
None.
1
ERROR
IPsec ping monitor detects loss if ping replies of packets INSIDE the
tunnel
271
Chapter 2. Log Message Reference

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dfl-860eDfl-2560gDfl-1660Dfl-2560

Table of Contents