Hwaddr_Change (Id: 00300008); Arp_Cache_Size_Limit_Reached (Id: 00300030) - D-Link NetDefend DFL-210 Log Reference Manual

2.4.8. hwaddr_change (ID: 00300008)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Context Parameters
2.4.8. hwaddr_change (ID: 00300008)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Context Parameters

2.4.9. arp_cache_size_limit_reached (ID: 00300030)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
NOTICE
ARP hw sender does not match Ethernet hw sender. Dropping
The hardware sender address specified in the ARP data does not match
the Ethernet hardware sender address. Dropping packet.
drop
If this is not the desired behaviour, modify the configuration.
1
Rule Name
Packet Buffer
NOTICE
<knownip> has a different address <newhw> compared to the known
hardware address <knownhw>. Allow packet for further processing.
A known dynamic ARP entry has a different hardware address than the
one in the ARP packet. Allowing packet for further processing.
allow_processing
If this is not the desired behaviour, modify the configuration.
1
knownip
knownhw
newhw
Rule Name
Packet Buffer
NOTICE
ARP cache size limit reached
The ARP cache size limit has been reached. Current license limit is
[limit].
None
Update your license to allow a greater amount of concurrent ARP
entries.
1
limit
150
Chapter 2. Log Message Reference