Authdb_Error (Id: 02500502); Ldap_Error (Id: 02500503); Mppe_Decrypt_Fail (Id: 02500600) - D-Link NetDefend DFL-210 Log Reference Manual
Network security firewall
Hide thumbs
Also See for NetDefend DFL-210:
- User manual (495 pages) ,
- Cli reference manual (213 pages) ,
- Quick installation manual (33 pages)
Table of Contents
Advertisement
2.30.20. authdb_error (ID: 02500502)
2.30.20. authdb_error (ID: 02500502)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
2.30.21. ldap_error (ID: 02500503)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
2.30.22. MPPE_decrypt_fail (ID: 02500600)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
ERROR
Local database authentication error. PPP Authentication terminated
There was an error while authenticating using a local user database.
PPP Authentication terminated.
authentication_terminated
None.
1
tunnel_type
ERROR
LDAP server authentication error. PPP Authentication terminated
There was an error while authenticating using a LDAP server. PPP
Authentication terminated.
authentication_terminated
None.
1
tunnel_type
ERROR
MPPE decryption resulted in the unsupported protocol <protocol>.
Terminating PPP
MPPE decryption resulted in an unsupported protocol. IP is the only
protocol supported. This either means that the decryption failed or that
the peer actually sent data using an unsupported protocol. PPP is
terminated.
ppp_terminated
Reconnect the tunnel. If the peer keeps sending the same unsupported
protocol, try to reconfigure the peer to only send IP packets through
the tunnel.
1
protocol
366
Chapter 2. Log Message Reference
Advertisement
Table of Contents
