2.46.7. enet_hw_sender_multicast (ID:
04400416)
Revision
Context Parameters
2.46.7. enet_hw_sender_multicast (ID: 04400416)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Context Parameters
2.46.8. relay_stp_frame (ID: 04400417)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
2.46.9. dropped_stp_frame (ID: 04400418)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
1
Rule Name
Packet Buffer
WARNING
Ethernet hardware sender is a multicast address. Dropping.
The Ethernet hardware sender address is a multicast address. The
packet will be dropped.
drop
Investigate if there are equipment sending packets using a multicast
address as sender MAC address. If there are, try to change the
behaviour of that equipment.
1
Rule Name
Packet Buffer
INFORMATIONAL
Relaying STP frame from <recvif> to switched interfaces
An incomming STP frame has been relayed to all switched interfaces
in the same switch route as [recif].
allow
None.
1
recvif
INFORMATIONAL
Dropping STP frame from <recvif>
An incomming STP frame has been dropped.
drop
None.
1
recvif
447
Chapter 2. Log Message Reference