Multicastsettings - D-Link NetDefend DFL-210 Cli Reference Manual

Network security firewall
Hide thumbs Also See for NetDefend DFL-210:
Table of Contents

Advertisement

3.55.17. MulticastSettings

HighBuffers_Dynamic
HighBuffers
LocalUndelivered
MaxPipeUsers
Reassembly_MaxConnections
Reassembly_MaxProcessingMem
AVSW_Engine
3.55.17. MulticastSettings
Description
Advanced Multicast Settings.
Properties
AutoAddMulticastCoreRoute
IGMPBeforeRules
IGMPMaxGlobalRequestsPer-
Second
IGMPMaxRequestsPerSecond
IGMPReactToOwnQueries
IGMPRobustnessVariable
IGMPQueryInterval
IGMPQueryResponseInterval
IGMPStartupQueryInterval
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Allocate the HighBuffers value dynamically. (Default: Yes)
Number of packet buffers to allocate in addition to the ~200
initial buffers. (Default: 1024)
How to treat (allowed) packets to the Security Gateway that
do not match open ports (snmp, scp, netcon, etc). (Default:
DropLog)
Max number of concurrently tracked pipe users. (Default:
1024)
Maximum percentage of the maximum allowed connections
that data reassembly may be performed on. (Default: 80)
Maximum percentage of device memory that may be used for
processing data on reassembled connections. (Default: 3)
Antivirus Software Engine Selection. (Default: Auto)
Auto generate core route for "224.0.0.1-239.255.255.255".
(Default: Yes)
Allows IGMP traffic to enter the Security Gateway by de-
fault. (Default: Yes)
Maximum number of requests per second. (Default: 1000)
Maximum number of requests per interface per second.
(Default: 100)
The Security Gateway should always respond with Member
Reports, even to Queries originating from itself. (Default: No)
IGMP is robust to 'value' - 1 packet losses. (Default: 2)
The interval (ms) between general queries sent by the Secur-
ity Gateway. (Default: 125000)
The maximum time (ms) until a host/client has to send an an-
swer to a query. (Default: 10000)
The general query interval (ms) to use during the startup
phase (default: 1/4 of the 'IGMP Query Interval' parameter.
(Default: 30000)
197
Chapter 3. Configuration Reference

Advertisement

Table of Contents
loading

Table of Contents