Transmitting A Status - Icom IF1721/D Instruction Manual

3
BIIS OPERATION

Transmitting a status

■
D General
The status message can be selected with the programmed
text, and the message text is also displayed on the function
display of the called station.
Up to 24 status types (1 to 24) are available, and the status
messages 22 and 24 have designated meanings.
Status 22: Emergency*
Status 24: GPS request
* The status 22 can also be used as a normal status message
by disabling the designated meaning. However, the status 24 is
fixed.
The status call can be sent with both individual and group
calls.
21
D Transmitting a status
While in the standby condition, push [P1] (Digital), then
q
push [Up] or [Down], or rotate [DIAL] to select the desired
station/group code.
Push [P1] (Digital) again, then push [UP] or [DOWN]
w
select the desired status message.
Or, you can select the desired status message using [Sta-
tus Up]/[Status Down] key directly.
S T A T U S
T X S t a t u s
Status message is displayed.
Push [P0] (Call) or [PTT]* to transmit the status message
e
to the selected station/group.
*PTT call can be made only when PTT call capability is permitted.
• 2 beeps will sound and the transceiver returns to the standby
condition automatically when the transmission is successful.
to
0 1
0 1