Table of Contents
Advertisement
Antenna
■
A key element in the performance of any communication sys-
tem is an antenna. Contact your dealer about antennas and
the best places to mount them.
Fuse replacement
■
A fuse is installed in the supplied DC power cable. If a fuse
blows or the transceiver stops functioning, track down the
source of the problem if possible, and replace the damaged
fuse with a new rated one.
❑ Fuse rating: 20 A
USE the 20 A fuse only.
Cleaning
■
If the transceiver becomes dusty or dirty, wipe it clean with a
soft, dry cloth.
AVOID using solvents such as benzene or alcohol,
as they may damage the transceiver surfaces.
CONNECTION AND MAINTENANCE
Options
■
• RMK-2
+
separation kit
OPC-607/OPC-608/OPC-609
separation cables
Allows you to install the transceiver main unit separately from the
front panel for operating convenience.
• SP-5/SP-10/SP-22/SP-30/SP-35
Input impedance : 4 ø
Max. input power : 6 W (SP-5)/5 W (SP-10)/
7 W (SP-22/SP-35)/30W (SP-30)
SP-5
: Large speaker for good audio quality.
SP-10
: For all-round mobile operation.
SP-22/SP-35
: Compact and easy-to-install.
SP-30
: High input power level.
• HM-152/HM-152T/HM-148G/HM-148T
HM-152
: Hand microphone
HM-152T : DTMF microphone
HM-148G : Self ground heavy duty microphone
HM-148T : Self ground heavy duty DTMF microphone
The 10-keypad of this microphone can be used for the
DTMF code transmission only.
• SM-25
desktop microphone
• UT-109 (#02)/UT-110 (#02)
scrambler units
Non-rolling type (UT-109)/Rolling type (UT-110) voice scrambler
unit provides higher communication security.
• OPC-617
acc cable
Allows you to connect to an external terminal.
Some options may not be available in some countries. Please ask
your dealer for details.
4
external speakers
hand microphones
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
30
Advertisement
Table of Contents
