Henny Penny CLIMAPLUS LCS Applications Manual page 23

Applications manual and cooking guide
Table of Contents

Advertisement

COOKING MODES
Forced Steaming
continued
CONT-RUN
CONT-RUN
Operation and settings
Turn unit on.
Select MOIST HEAT mode and set TIMER on Continuous Run.
Preheat to set temperature.
Load oven.
Set desired Forced Steaming TEMPERATURE 213-265°F (101-130°C) using
Central Dial.
Select TIMER. Set desired cooking time using Central Dial OR select
IQT Sensor and set desired core temperature using Central Dial OR select
Continuous Run.
Unload oven when done. Unit automatically shuts off when door is opened.
NOTE: LCS & LCG models 20 & 40 have a built-in safety latch that lets steam
and heat out before door fully opens. Safety latch is optional on models 6, 10 and
1020. If your ClimaPlus Combi is NOT equipped with this feature, open door
slightly until fan stops and steam dissipates. Open door fully to unload.
Opening Door During Operation
Open door slightly to allow hot steam and/or vapors to escape. KEEP FACE AND
HANDS AWAY FROM OPENING or burns could result. When steam and/or heat
has dissipated open door fully with care. Escaping hot steam and/or vapors can cause
serious burns. Interior surfaces, including pans, grids and oven racks, can be extremely
hot. To prevent burns, allow unit to cool or use appropriate heat resistant protective
mitt or pad when handling. Do not use built-in retractable hand shower when cabinet
temperature is above 212°F (100°C) or burns could result.
X
22

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents