Advertisement
Problem
Foaming or boiling
over of shortening
Shortening will
not drain from frypot
Shortening leaking
through drain valve
1103
Cause
SHORTENING FOAMING/DRAINING SECTION
• Water in shortening
• Condensation line stopped up
• Improper or bad
shortening
• Improper filtering
• Cold zone full of cracklings
• Improper rinsing after
cleaning the fryer
• Drain valve clogged with
crumbs
• Obstruction in drain
• Faulty drain valve
Correction
• At end of a Cook Cycle,
drain shortening and clean
frypot; add fresh shortening
• Remove and clean condensation
line
• Use recommended
shortening
• Refer to the procedure
covering filtering the shortening
• Filter shortening
• Clean and neutralize the
frypot; rinse with vinegar
to remove the alkaline, then
rinse with hot water and
dry frypot
• Open valve - push cleaning
rod through drain opening from
inside of frypot
• Remove obstruction
• Replace drain valve
Model 290
1-8
Advertisement
