Impex MARCY DIAMOND ELITE MD-389 Owner's Manual page 9

STEP 4 (See Diagram 4)
A.) Attach the two side-holes on the two Backrest Supports (#10) to the pivot on the Main
Seat Support (#3). Place the other end of Backrest Supports against the Backrest
Adjustment Bar (#9)
B.) Place the Backrest Board (#17) onto the Backrest Supports. Secure it with four M6 x 1
½" Hex Bolts (#39) and four  ½" Washers (#43).
C.) Attach the Seat (#18) to the Main Seat Support (#6). Secure it with four M6 x 1 3/8"
Allen Bolts (#40) and four  ½" Washers (#43).
D.) Attach the Arm Curl Pad (#19) to the Arm Curl Stand (#6). Secure it with two M8 x 5/8"
Allen Bolts (#37) and two Ø 5/8" Washers (#44).
E.) Insert the Arm Curl Stand into the opening on Front Post (#5). Use the M10 x 2 3/8"
Lock Knob (#31) to lock it in position.
8
DIAGRAM 4