Answering System; Answering System Settings; Announcement - AT&T TL92273 User Manual

Answering system

Answering system settings

Use the answering system menu of a system handset to set up the
announcement message, turn the answering system or message alert tone on
or off, activate call screening, or change the number of rings, remote access
code or message recording time. If you turn off the answering system and you
change any setting in the answering system setup menu, the answering system
automatically turns on again.

Announcement

Your outgoing announcement plays when calls are answered by the
answering system.
The telephone has a default outgoing announcement, "Hello, please leave a
message after the tone." You can use this default announcement, or record
your own.
You can record an announcement up to 90 seconds. The system does not
record any announcement shorter than two seconds.
To play your current outgoing announcement:
1. Press MENU
2. Press or
CID
SELECT.
3. Press SELECT
4. Press or
CID
SELECT.
in idle mode.
to highlight Answering sys, then press
DIR
again to select Announcement.
to highlight Play annc, then press
DIR
77
ANSWERING SYS
Announcement
Delete al l old
Record memo
BACK SELECT
ANNOUNCEMENT
Record annc
Play annc
Reset annc
BACK SELECT
Playing
announcement...
RECORD STOP