Table of Contents
Advertisement
Bluetooth
Bluetooth setup
6.
Press
NEXT
displays Set cell to search base: AT&T DECT 6.0 PIN: 0000.
7.
Promptly turn on the Bluetooth feature of your cell phone and search for
or add new devices. Once your cell phone finds your AT&T phone (AT&T
DECT 6.0), press the appropriate key on your cell phone to continue the
pairing process.
•
Your cell phone may require a passcode. In this case the handset screen
displays Check cellular. ENTER PASS CODE. Enter the cell phone
passcode (typically 0000) into the handset and
press SET.
•
Enter the PIN of the telephone base (the default PIN
is 0000) into your cell phone to continue the pairing
process if required. The handset displays Adding Cell
Phone A.
When a device is successfully connected, the handset
displays Cell Phone A is added and connected to
base. You hear a confirmation tone. The corresponding
status icon (
corresponding device light on the telephone base (CELL 1
or CELL 2/HEADSET) turns on.
If you have trouble pairing your cell phone, it may not be compatible with
your TL92273/TL92373/TL92473. Check the Bluetooth compatibility list at
www.telephones.att.com/bluetooth
NOTES:
•
The pairing process may take up to one minute. If the pairing process fails, try again.
•
If you put the handset back in the telephone base or charger while pairing, the process is
cancelled and the handset returns to idle mode.
•
If a device fails to connect, the handset displays Cell Phone A is added to device list, and then
displays Please use cell to connect to base.
•
Refer to the user's manual of your cell phone on how to search for or add a new Bluetooth
device.
to turn on the telephone base discoverable mode. The screen
1 or
2) displays on the handset. The
.
17
Adding
Cel l Phone A
to device
list...
1
Cel l Phone A
is added
and connected
to base.
Hide quick links:
Advertisement
Table of Contents
