Heat & Glo SLR (Cosmo) Owner's Manual page 25

1. Top Vent - Horizontal Termination - (continued)
V Minimum
90° Elbow
1 ft. 305 mm
2 ft. 610 mm
3 ft. 914 mm
4 ft. 1.2 m
H + H MAX. =14 ft. (4.3 m)
1
V + H + H MAX. = 40 ft. (12.2 m)
1
H
2
Figure 7.5
Top Vent - Horizontal Termination
Venting with 2 elbows
H + H MAXIMUM
1 2
SLR
1 ft. 305 mm
2 ft. 610 mm
4 ft. 1.2 m
6 ft. 1.8 m
14 ft. 4.3 m
INSTALLED
HORIZONTALLY
Heat & Glo • SLR • 2143-900 Rev. D • 12/08
Note: Use SLP Series
components only.
Note: There MUST be a 25%
reduction in total H when using
fl ex vent except when using the
simple up and out installation
(see Figure 7.3).
Note: The SLP-HRC-SS and
SLP-HRC-ZC-SS termination
caps are not approved for use
with propane (LP) fuel.
H
1
V
1
25