Positioning The Logs - Heat & Glo SL-550TV-D Owner's Manual

G. Positioning the Logs
If the gas logs have been factory installed they should not
need to be positioned. If the logs have been packaged
separately, refer to the following instructions.
2
1
LOG #1 (SRV2044-700):
onto the grate bars. Slide the log to the front tab for NG, slide to the rear tab for LP.
LOG #2 (SRV550-717):
Slide the right edge of log #2 forward until it touches the grate.
26
4
5
3
NOTCHES
Place log #1 onto the grate bars so that the notches in the bottom of the log fi t
NOTCH
Place log #2 on the right two grate bars using the notch on the bottom of log #2.
Heat & Glo • SL-550 / 750 / 950TV-D • 2053-985 Rev. H • 9/06
Log Set Assembly: LOGS-SL550-D
Models: SL-550TV-D
Carefully remove the logs from the packaging.
CAUTION: Logs are fragile!
METAL TABS
TABS
1
2