Warnings And Guidelines - Runco Reflection VX-5c Owner's Operating Manual

Digital light processing projector and vhd ultra controller
Hide thumbs Also See for Reflection VX-5c:
Table of Contents

Advertisement

4.1

Warnings and Guidelines

This projector is CSA approved and is designed for safe and reliable operation. However, safe
operation cannot be assured by design alone; installers, maintainers, and users must maintain a
safe operating environment for the system. Please read through and understand the following
warnings and guidelines promoting safe usage of the projector.
Labels and Markings
Observe and follow all warnings and instructions marked on the projector.
The exclamation point within the equilateral triangle alerts the user to important
operating and maintenance (servicing) instructions in the literature accompanying
the projector.
The lightning flash and arrowhead symbol within the equilateral triangle alerts the
user to non-insulated "dangerous voltage" within the projector's enclosure that may
be of sufficient magnitude to constitute a risk of electric shock.
Projector Location
Operate the projector in an environment that meets the operating range specifications in Section
5, Specifications. Do not operate the projector close to water, such as near a swimming pool.
Do not place the projector on an unstable cart, stand or table. If the projector is to be ceiling
mounted, only use a Runco-approved ceiling mount fixture.
A projector and cart combination should be used with care. Sudden stops, excessive
force, and uneven surfaces may cause the projector and cart combination to over-
turn.
!
Never look directly into the projector lens.
The extremely high brightness of this projector
can cause permanent eye damage.
!
For protection from ultraviolet radiation,
keep all projector shielding intact during operation.
4-1
Maintenance
!
WARNING
!
WARNING
!

Advertisement

Table of Contents
loading

Table of Contents