Table of Contents
Advertisement
INSTALLATION AND SETUP
RS-422 NETWORK: To control multiple projectors with a computer/controller having an RS-
422 interface, you can chain the projectors together by connecting the RS-422 PORT 2 connec-
tor of the first projector (already connected to the computer/controller) to the RS-422 PORT 1
connector of the next projector in the chain.
Figure 2.22. Adding Another Projector via RS-422
For either type of network, continue connecting projectors in this manner until you've reached the
last projector in the chain, so that only the last projector has an empty RS-232 OUT (or RS-422
PORT, if applicable). See examples on the following page.
2-23
Advertisement
Table of Contents
