Runco Reflection VX-5c Owner's Operating Manual page 51

Copying or Deleting Channels
TO COPY A CHANNEL, highlight the desired channel in the Channel Setup menu, then press
to go to the Channel Copy/Delete submenu. Select "Copy" and press
Func
will be created. It is identical to original, which still remains, but it is identified with the next
available number from 01-99. If you change your mind and do not want to copy the current
channel, press
method for creating numerous channels, each of which can then be edited and adjusted for a
variety of presentations in the future.
TO DELETE A CHANNEL, highlight the desired channel in the Channel Setup menu, then
press
confirmation window will appear to make sure that you really want to delete this channel.
TO DELETE MULTIPLE CHANNELS, highlight any channel in the Channel Setup menu
and press
press
Enter
nels, even those that are locked. In either case, the current channel will remain but will be rede-
fined from projector defaults.
NOTE: For any deletion, a confirmation box appears to make sure that you really want to
delete. Select "Cancel" (default) if you don't want to delete after all.
Editing a Channel Setup
The basic setups that describe how and where a channel can be accessed are listed in the
Channel Setup menu. These channel setups can be edited at any time in the Channel Edit sub-
menu.
to cancel and return to the previous menu. Copying channels is a quick
Exit
to activate the Channel Copy/Delete submenu. Select "Delete" and press
Func
to go to the Channel Copy/Delete submenu. Select "Delete Unlocked Only" and
Func
to delete all unlocked channels. Or select "Delete All Channels" to delete all chan-
Figure 3.8. Copying A Channel
Figure 3.9. Deleting a Channel
3-17
OPERATION
-a new channel
Enter
-a
Enter