Adding Soft Vibrato (Tremulant) - Roland C-330 Owner's Manual

Adding soft vibrato (Tremulant)

The tremulant effect adds vibrato (cyclic modulation) to the sound.
Use this when you want to add an expressive feel to a solo or small ensemble performance. This is often used on compositions of the
romantic era, gospel, and music for worship services.
SHORTCUT
1.
From the main screen, press the [Select/Menu] knob.
2.
Turn the [Select/Menu] knob to select "7 Tremulant."
fig.Tremulant2.eps
3.
Press the [Select/Menu] knob.
The "Tremulant" screen will appear.
fig.Tremulant2.eps
4.
Turn the [Select/Menu] knob toward the left to move the cursor to the top line of the screen.
5.
Turn the [Value/Exit Menu] knob to select either "MAN–I (Manual-I)" or "MAN-II (Manual-II)."
Specify the division for which you want to make tremulant settings.
6.
Turn the [Select/Menu] knob to select either "Depth" or "Rate," and turn the [Value/Exit Menu] knob to adjust
the setting.
Indication
Depth
Rate
Press the [Value/Exit Menu] knob twice to return to the main screen.
If you want the setting to be remembered even after the power is turned off, refer to
"Storing your settings (Customize)" (p. 65).
You can also get to the "Tremulant" screen shown in step 3 by holding down the [SET] piston in the basic screen and
pressing the [Tremulant] tablet for the division you wish to select.
Explanation
With a setting of "0," no tremulant will be applied.
Increasing this value will make the tremulant deeper.
A slow tremulant will be applied with a setting of "0," and this will become faster as you
increase the value.
Playing the C-330
Range
0–127
0–127
31