Changing The Range Of The Melody Coupler - Roland C-330 Owner's Manual

Changing the range of the melody coupler

You are free to change the range in which the melody coupler will operate. The specified note and those above it will use the melody
coupler, and notes below it will not. The specified note itself is included in the melody coupler range.
SHORTCUT
1.
From the main screen, press the [Select/Menu] knob.
2.
Turn the [Select/Menu] knob to select "6 Console."
fig.Tremulant2.eps
3.
Press the [Select/Menu] knob.
The "Console" screen will appear.
fig.Tremulant2.eps
4.
Turn the [Select/Menu] knob to select "Mel Split."
5.
Turn the [Value/Exit Menu] knob to change the setting.
Press the [Value/Exit Menu] knob twice to return to the main screen.
If you want the setting to be remembered even after the power is turned off, refer to "Storing your settings" (p. 65).
You can also access the "Console" screen (step 3) from the main screen by holding in the [SET] piston and pressing
the [MEL] piston.
Bottom key of the Melody coupler range
This number is counted
starting with the leftmost
key as "1."
Melody coupler
Playing the C-330
27